TPMH-2R
The wear measurement device can measure the rigid catenary system contact line. The measuring head uses the wireless micro camera as the image acquisition key measuring part, the measuring head, wireless data receiver and one pc Ultrahigh voltage insulati
The wear measurement device can measure the rigid catenary system contact line. The measuring head uses the wireless micro camera as the image acquisition key measuring part, the measuring head, wireless data receiver and one pc Ultrahigh voltage insulating rod assemble one full set measuring device.
Worker holds UHV insulating rod to push the measuring head touches each measurement point, full system uses Zigbee technology data to transmit measuring values wirelessly, wireless diagnostor collect the measuring data and to do date analysis and storage. The wireless diagnostor uses touch screen computer technology, operator may input working area mark like area No./Line NO./Pole NO. The wear measurement device uses a special software to statistically analyze the contact line wear area data, and can connect PC to exchange data and print out the specified report specifications via U等 port .
ASSEMBLY
TECHNICAL PARAMETERS
Measuring height: 1m~6.5m
Scope of application: CT85,110,120,150 or other; DIN 43141/TB/T2810 wire
Measurement accuracy: 0.02mm
Data transmission: Zigbee technology, data wireless transmission, ground receiving terminal synchronous display
Display content: Pillar number, wire wear width, wear percentage prompt
Storage: Applause computer(added) real-time storage
Insulation performance: Suitable for power frequency, single-phase(AT27.5KV,BT25KV) contact network live working
Portable: Probe weight<1kg
Power: Probe and receiver using lithium-ion batteries
Power consumption: Can work continuously for 8 hours at room temperature
Working environment: -10℃~+50℃
Relative humidity: 80%
