CM series

Test procedures require that specimens are cast in a number of standard sizes convenient for compressive and flexural strength determination. The engineering tolerances specified for moulds are very stringent and the internal finish of the surface must be of a high order to comply with the recommendations laid down in many international standards. Moulds must not deform during manufacture of concrete specimens if the specimen dimensions are to be maintained. 

CM-FA CAST IRON CUBE MOULD
4-part with clamp attached base plate. Cube mould for concrete hardened testing. Material is cast iron. Machined surface finished by flat grinding machine. No distortion during specimen preparation.

TECHNICAL PARAMETERS

CM-FA CAST IRON CUBE MOULD
CM-FA100 100×100×100mm 9.5kg
CM-FA150 150×150×150mm 18kg

CM-FB CAST IRON CUBE MOULD
CM-FB100 100×100×100mm 9kg
CM-FB150 150×150×150mm 16kg

CM-FC CAST IRON CUBE MOULD
CM-FC100 100×100×100mm 9kg
CM-FC150 150×150×150mm 16kg

CM-E CAST IRON CUBE MOULD
CM-E100 100×100×100mm 5.5kg
CM-E150 150×150×150mm 10kg
CM-E200 200×200×200mm 16kg

CM-T CAST IRON CUBE MOULD
CM-T100 100×100×100mm 9kg
CM-T150 150×150×150mm 16kg

CM-FD150 CAST IRON CUBE MOULD
CM-FD150 150×150×150mm 13kg

CM-FS150 STEEL CUBE MOULD
CM-FS150 150×150×150mm 8.8kg

CM-SA150 STEEL CUBE MOULD

CM-SA150 150×150×150mm 15.8kg

CM-P PLASTIC CUBE MOULD
CM-P100 100×100×100mm 0.7kg
CM-P150 150×150×150mm 0.9kg
CM-PT150 150×150×150mm 1.0kg

CM-PA150 PLASTIC CUBE MOULD

CM-PA150 150×150×150mm 2.7kg

CM-CU150 POLYURETHANE CUBE MOULD

CM-CU150 150×150×150mm 1.6kg