TSZ-5T

The Fully Automatic Triaxial Testing System Apparatus model is adopting the most advanced technology. It is integrated the technology of mechanic, electronic, fully-automated control and sensor automated checking.

The device consists of Triaxial Loading Frame, Advanced Pressure Volume Controller (APVC), Triaxial Cell, various sensors, temperature control devices and AdvancedGeoLAB® software. The range of Triaxial Loading Frame has been designed to be used as part of computer controlled triaxial system or as a stand alone unit. The Triaxial Loading Frame and Advanced Pres-sure Volume Controller both are equipped with the LCD graphical display and panel keypad.

TEST-CONTROL MODULES

·Data Acquisition Module

·Back Pressure Saturation Test;

·Consolidation in same direction and consolidation in different direction (pre contact) test;

·Unconsolidated – undrained test (U-U test);

·Consolidation – undrained test (C-U test);

·Consolidation – drainage test (C-D test);

TRIAXIAL LOAD FRAME

Triaxial Loading Frame has good rigidity, durability, low noise and smooth operation, adopts the step-per motor coupled with worn gear drive system to supply the power source. It is equipped with upper and lower limit device; the axial deformation is measured and col-lected by high-precision displace-ment sensor. Axial load is measure by force sensors. With overload pro-tection device, when the axial force loaded is larger than the measuring range of the sensor, the machine will stops working automatically.

ADVANCE PRESSURE VOLUME CONTROLLER

The Advanced Pressure Volume Controllers is very easy to use and an ideal solution for the most modern laboratories. When used with Triaxial Loading Frame, data loggers and software, they can be controlled from a computer to form part of a com-plete automated triaxial testing system. They may also be used as stand alone units which are fully functioning with or with-out computer control. All the devices have their own computer interface. The devices come complete with internal volume and pressure transducers. Both channels are pre-calibrated, it can generate pressures up to 2MPa and provides a maximum volume measure-ment of 60ml which is readable to 0.001ml.

TRIAXIAL CELL

It is mainly composed of base, middle ring, upper cover, side wall and loading rod, etc. It is connected by quick clamp rod, which is easy to disassemble. There are 3 drain-age ports at the bottom for connecting hole pressure, con-fining pressure and back pressure.

SOFTWARE ADVANCEDGEOLAB®

Software AdvancedGeoLAB® is a breakthrough in geotechnical laboratory control software. It enables the selection of spe-cific test modules for any international standard requirement. The flexibility of hardware configuration means that test quali-ty will depend on additional hardware, not software.

TECHNICAL PARAMETERS

TRIAXIAL LOAD FRAME TSZ-5T

Maximum Axial Force (Load Sensor): 50 kN

Chamber: Ø 38mm x76mm (H) & Ø 50mm x100mm (H)

Testing Speed Rate: 0.00001 - 9.99999 mm/min

Precision: +/- 0.1% F.S.

Displacement Sensor Measuring Range: 25mm with accuracy 0.01mm

Maximum Vertical Clearance: 500mm

Horizontal Clearance: 300mm

Platen Diameter: 148mm

Power: 110-240V, 50Hz

Dimension(mm): 580mm (L) x 380mm (W) x1140mm (H)

Weight(kg): 105

ADVANCE PRESSURE VOLUME CONTROLLER TPS-PVC-1

Channel: 2 Channel

Maximum Pressure: 2MPa

Resolution: 1kPa

Maximum Volume: 60ml

Resolution: 0.001 ml

Precision: +/- 0.1 % F.S.

Confining Pressure: Measuring Range: 0 ~ 2 MPa, Resolution: 1 kPa, Accuracy: +/- 1 kPa

Back Pressure: Measuring Range: 0 ~ 2 MPa, Resolution: 1 kPa, Accuracy: +/- 1 kPa

Power supply: 110V or 240V，50Hz

Dimensions: 870×530×320 (mm)

Weight: 38Kg

TRIAXIAL CELL TPS-YLS50

Sample Size: Ø 38mm(D.) x 76mm (H.) and Ø 50mm(D.) x 100mm (H.)

Maximum Cell Pressure: 2000 kPa

Dimensions: Ø 180 mm

Weight: 12kg