SM series

The slump cone test set is carried out by filling the slump cone with freshly mixed concrete which is tamped with a steel rod in three layers.The concrete is levelled off with the top of the slump cone,the cone removed,and the slump of the sample is immediately measured.

We propose two different models:the standard one particularly suitable for laboratory testing and the portable model very practical for site testing shown as below.

Each component of the kits can be ordered separately.

The user can personalize the kit composition for the Slump Cone test.

SM series Slump cone

SM-R3 Steel rule 300 mm long

SM-R5 steel rule 500 mm long(user selectable)

SM-BF40 Metal base plate 400x400x1.5 mm galvanized,with one handle.

SC-R24 Scoop

TR-S600 Steel tamping rod,dia.16x600 mm

TR-S380 Metal tamping bar,25x380 mm long(optional)

SM series slump cone

SM-BP/C Metal base plate with clamps and measuring bridge

SC-R24 Scoop

TR-S600 Steel tamping rod,dia.16*600mm

Portable slump cone test set complete with metal base plate SM-BP/C and TR-S600 tamping rod.Clamps on the base hold the cone for filling and tamping.After the cone is removed,the handle raises over the specimen and the slump is measured using a 22 cm scale engraved in 1 cm increments on the end of the rod.The set of components are fitted together for easy carrying.